

TRC SERIES OVERVIEW

TRC Series loudspeakers offer outstanding full-range
performance from compact, cost effective 2-way loudspeaker
systems.  They feature unique multi-angle cabinets and the
revolutionary Complex Conic Waveguide Technology recently
developed by Renkus-Heinz.

Complex Conic Waveguide Technology combines the best features
of constant directivity and oval horn designs in a complex
conical waveguide that provides superior pattern control,
especially at the higher frequencies.  The conical waveguide
also completely eliminates "pattern flip", a phenomenon of
constant directivity horns that reverses the directional
chacteristics at some low frequency.  

The waveguide's smooth profiles also reduce high frequency
"fluttering" distortion and coloration.  As a result, Complex
Conic horns produce a far more natural sound than any prior
horn technology.  The unique design of these horns allows them
to be rotated 90  within the cabinet to permit horizontal
mounting in low ceiling applications.

The unique multi-angle cabinets used on all models (except for
the TRC61 and the TRC152) lend themselves to both wall and
ceiling installation and to typical array configurations. 
They even allow these loudspeakers to be used as floor
monitors.  The sub-compact TRC61 features a 20  trapezoidal
cabinet that is only 7 1/2" deep and 7 3/4" wide, while the
TRC152 has a 40  trapezoidal cabinet that allows its use in
TRue Array Principle (TRAP) arrays.

MODEL TRC61 SPECIFICATION

The loudspeaker shall be a Renkus-Heinz TRC61 or approved
equal full-range, 2-way loudspeaker system utilizing Complex
Conic horn technology.  Loudspeakers having conventional
constant beamwidth or oval horns will not be considered equal. 


The loudspeaker system shall consist of a heavy duty 6.5"
woofer and an extended-range 1" Titanium HF driver coupled
to a single Complex Conic, high frequency horn. The 6.5"
woofer shall have a 1" VC, treated fiber cone and a
continous program power rating of at least 150 watts.  High
frequency power handling capacity shall be no less than 40
watts RMS @ 8 ohms  The loudspeaker shall provide wide-angle
150  horizontal dispersion and 60  vertical coverage. 
 
Sensitivity shall be no less than 91 dB @ 1w,1m with a
maximum continuous SPL of at least 111  dB.  The frequency
response shall be 80 Hz to 20 kHz.  The enclosure shall be
constructed from multi-ply hardwood.  The finish shall be
(black paint) (white paint) (custom color paint) (natural)
(weather resistant).  (screw  terminals) (Neutrik 4-pin
connectors) shall also be included.    

The loudspeaker shall be no larger than 15 1/2"  high, 7
3/4" wide and 7 1/2" deep. It shall weigh no more than 8
Lbs.  A matching perforated metal grille shall be included. 
The enclosure shall be equipped with (8 1/4-20 attachment
points) (T-Nuts for Omnimount Series 50 mounting hardware). 
It shall also include a built-in crossover having a
continous program power rating of 150 watts at 8 ohm. 


MODEL TRC81/9 & TRC81/12 SPECIFICATIONS

The loudspeaker shall be a Renkus-Heinz model (TRC81/9)
(TRC81/12)  or approved equal full-range, 2-way loudspeaker
system utilizing Complex Conic horn technology. 
Loudspeakers having conventional constant beamwidth or oval
horns will not be considered equal.  

The loudspeaker system shall consist of a heavy duty 8"
woofer and an extended range 1" Titanium HF driver coupled
to a single Complex Conic, high frequency horn.  The 8"
woofer shall have a 2" VC, treated fiber cone and 200 watt
continous program power rating.  High frequency power
handling capacity shall be no less than 40 watts RMS @ 8
ohms.  The loudspeaker shall provide closely controlled
(90 ) (120 ) horizontal dispersion and 60  vertical
coverage.
  
Sensitivity shall be no less than 93 dB @ 1w,1m with a
maximum continuous SPL of at least 115  dB.  The frequency
response shall be 65 Hz to 20 kHz.  The enclosure shall be
"multi-angled" in shape and constructed from multi-ply
hardwood.  The finish shall be (black paint) (white paint)
(custom color paint) (natural) (weather resistant).  The
loudspeaker shall be equipped with (screw terminals)
(Neutrik 4-pin connectors).  

The loudspeaker shall be no larger than 19 3/4"  high, 9
3/4" wide and 9" deep. It shall weigh no more than 17 Lbs. 
A matching perforated metal grille shall be included.  The
enclosure shall be equipped with (universal mounting
hardware providing a minimum of 12 attachment points) (a
nut-plate for Omnimount Series 75 mounting hardware).  It
shall also include a built-in 2400 Hz crossover having a
continous program power rating of 180 watts at 8 ohms. 


MODEL TRC82/9 & TRC82/12 SPECIFICATIONS

The loudspeaker shall be a Renkus-Heinz model (TRC82/9)
(TRC82/12) or approved equal full-range, 2-way loudspeaker
system utilizing Complex Conic horn technology.  Loudspeakers
having conventional constant beamwidth or oval horns will not
be considered equal.  

The loudspeaker system shall consist of dual heavy-duty 8"
woofers and an extended range 1" HF driver coupled to a
single Complex Conic, high frequency horn. The 8" woofers
shall have 2" VCs, treated fiber cones and 200 watt
continous program power ratings.  High frequency power
handling capacity shall be no less than 40 watts RMS @ 8
ohms  The loudspeaker shall provide closely controlled (90 )
(120 ) horizontal dispersion and 60  vertical coverage.
 
Sensitivity shall be no less than 96 dB @ 1w,1m with a
maximum continuous SPL of at least 122  dB.  The frequency
response shall be 60 Hz to 17 kHz.  The enclosure shall be
"multi-angled" in shape and constructed from multi-ply
hardwood.  The finish shall be (black paint) (white paint)
(custom color paint) (natural) (weather resistant).  The
loudspeaker shall be equipped with (screw terminals) (4-pin
Neutrik connectors).  

The loudspeaker shall be no larger than 28 1/2" high, 9 3/4"
wide and 9" deep. It shall weigh no more than 37 Lbs.  A
matching perforated metal grille shall be included.  (The
enclosure shall be equipped with universal mounting hardware
providing a minimum of 12 1/4-20 attachment points).  It
shall also include a built-in 1800 Hz crossover having a
continous program power rating of 400 watts at 8 ohms. 


MODEL TRC121/9(A) & TRC121/12(A) SPECIFICATIONS

The loudspeaker shall be a Renkus-Heinz model (TRC121/9)
(TRC121/12) or approved equal full-range, 2-way loudspeaker
system utilizing Complex Conic horn technology.  Loudspeakers
having conventional constant beamwidth or oval horns will not
be considered equal.  

The loudspeaker system shall consist of a heavy duty 12"
woofer and an extended range 1" HF driver coupled to a
single Complex Conic, high frequency horn. The 12" woofer
shall have a 4" VC, heavy-duty fiber cone and 700 watt
continous program power rating.  High frequency power
handling capacity shall be no less than 40 watts RMS @ 8
ohms  The loudspeaker shall provide closely controlled (90 )
(120 ) horizontal dispersion and 60  vertical coverage. 
 
Sensitivity shall be no less than 95 dB @ 1w,1m with a
maximum continuous SPL of at least 123  dB.  The frequency
response shall be 50 Hz to 17 kHz.  The enclosure shall be
"multi-angled" in shape and constructed from multi-ply
hardwood.  The finish shall be (black carpet) (black paint)
(white paint) (natural) (custom color paint) (weather
resistant).  The loudspeaker shall be equipped with (screw
terminals) (Neutrik 4-pin connectors).  

The loudspeaker shall be no larger than 23"  high, 14 3/8"
wide and 13" deep. It shall weigh no more than 54 Lbs.  A
matching perforated metal grille shall be included.  (The
enclosure shall be equipped with universal mounting hardware
providing a minimum of 12 1/4-20 attachment points.) (Use
only on loudspeakers havin a built-in crossover - - It shall
also include a built-in 1800 Hz 8-ohm crossover.) (Use only
on "A" model loudspeakers not having a built-in crossover -
- The loudspeaker system shall be designed for use with an
associated controller, Renkus-Heinz (X12) (X24) or approved
equal.  The controller shall provide an 1800 Hz electronic
crossover, parametric equalizers for loudspeaker response
smoothing and complete protection from overload damage.) 


MODEL TRC151/6 & TRC151/9 SPECIFICATIONS

The loudspeaker shall be a Renkus-Heinz model (TRC151/6)
(TRC151/9) or approved equal full-range, 2-way loudspeaker
system utilizing Complex Conic horn technology.  Loudspeakers
having conventional constant beamwidth or oval horns will not
be considered equal.  

The loudspeaker system shall consist of a heavy duty 15"
woofer and an extended range 1" HF driver coupled to a
single Complex Conic, high frequency horn. The 15" woofer
shall have a 4" VC, heavy-duty fiber cone and 700 watt
continous program power rating.  High frequency power
handling capacity shall be no less than 40 watts RMS @ 8
ohms  The loudspeaker shall provide closely controlled (60 )
(90 ) horizontal dispersion and 40  vertical coverage.
  
Sensitivity shall be no less than 92 dB @ 1w,1m with a
maximum continuous SPL of at least 125  dB.  The frequency
response shall be 40 Hz to 17 kHz.  The enclosure shall be
"multi-angled" in shape and constructed from multi-ply
hardwood.  The finish shall be (black carpet) (black paint)
(white paint) (natural) (custom color paint) (weather
resistant).  The loudspeaker shall be equipped with (screw
terminals) (Neutrik 4-pin connectors).  

The loudspeaker shall be no larger than 29 1/4"  high, 17
3/8" wide and 14 1/2" deep. It shall weigh no more than 69
Lbs.  A matching perforated metal grille shall be included. 
(The enclosure shall be equipped with universal mounting
hardware providing a minimum of 12 1/4-20 attachment
points.)  (Use only on loudspeakers having a built-in
crossover - - It shall also include a built-in 1800 Hz 8-ohm
crossover.) (Use only on "A" model loudspeakers not having a
built-in crossover - - The loudspeaker system shall be
designed for use with an associated controller, Renkus-Heinz
(X12) (X24) or approved equal.  The controller shall provide
an 1800 Hz electronic crossover, parametric equalizers for
loudspeaker response smoothing and complete protection from
overload damage.) 

MODEL TRC151D/6 & TRC151D/9 SPECIFICATIONS

The loudspeaker shall be a Renkus-Heinz model (TRC151D/6)
(TRC151D/9) or approved equal full-range, 2-way loudspeaker
system utilizing Complex Conic horn technology. 
Loudspeakers having conventional constant beamwidth or oval
horns will not be considered equal.  

The loudspeaker system shall consist of a heavy duty 15"
woofer and a 2" HF driver coupled to a single Complex Conic,
high frequency horn. The 15" woofer shall have a 4" VC,
heavy-duty fiber cone and 700 watt continous program power
rating.  High frequency power handling capacity shall be no
less than 100 watts RMS @ 8 ohms  The loudspeaker shall
provide closely controlled (60 ) (90 ) horizontal dispersion
and 40  vertical coverage.
  
Sensitivity shall be no less than 92 dB @ 1w,1m with a
maximum continuous SPL of at least 125  dB.  The frequency
response shall be 40 Hz to 17 kHz.  The enclosure shall be
"multi-angled" in shape and constructed from multi-ply
hardwood.  The finish shall be (black carpet) (black paint
(white paint) (natural) (custom color paint) (weather
resistant).  The loudspeaker shall be equipped with (screw
terminals) (Neutrik 4-pin connectors).  

The loudspeaker shall be no larger than 29 1/4"  high, 17
3/8" wide and 14 1/2" deep. It shall weigh no more than 69
Lbs.  A matching perforated metal grille shall be included. 
(The enclosure shall be equipped with universal mounting
hardware providing a minimum of 12 1/4-20 attachment
points.)  (Use only on loudspeakers having a built-in
crossover - - It shall also include a built-in 1200 Hz 8-ohm
crossover.) (Use only on "A" model loudspeakers not having a
built-in crossover - - The loudspeaker system shall be
designed for use with an associated controller, Renkus-Heinz
(X12) (X24) or approved equal.  The controller shall provide
a 1200 Hz electronic crossover, parametric equalizers for
loudspeaker response smoothing and complete protection from
overload damage.) 


MODEL TRC152D/6 & TRC152D/9 SPECIFICATIONS.

The loudspeaker shall be a Renkus-Heinz model (TRC152D/6)
(TRC152D/9) or approved equal full-range, 2-way loudspeaker
system utilizing Complex Conic horn technology.  Loudspeakers
having conventional constant beamwidth or oval horns will not
be considered equal.  

The loudspeaker system shall consist of a heavy duty 15"
woofer and an extended range 2" HF driver coupled to a
single Complex Conic, high frequency horn. Two 15" woofers
shall be provided.  Each shall have a 4" VC, heavy-duty
fiber cone and 700 watt continous program power rating. 
High frequency power handling capacity shall be no less than
100 watts RMS @ 8 ohms.  The loudspeaker shall provide
closely controlled (60 ) (90 ) horizontal dispersion and 40 
vertical coverage.  

Sensitivity shall be no less than 97 dB @ 1w,1m with a
maximum continuous SPL of at least 128  dB.  The frequency
response shall be 40 Hz to 17 kHz.  The enclosure shall be
trapezoidal in shape (20  sides) and constructed from multi-
ply hardwood.  The finish shall be (black carpet) (black
paint) (white paint) (natural) (custom color paint) (weather
resistant).  The loudspeaker shall be equipped with (screw
terminals) (Neutrik 4-pin connectors).  

The loudspeaker shall be no larger than 48 7/8"  high, 16
1/2" wide and 23 1/4" deep. It shall weigh no more than 136
Lbs.  A matching perforated metal grille shall be included. 
(The enclosure shall be equipped with universal mounting
hardware providing a minimum of 12 3/8-16 attachment
points).  (Use only on loudspeakers having a built-in
crossover - - It shall also include a built-in 1200 Hz 8-ohm
crossover.) (Use only on "A" model loudspeakers not having a
built-in crossover - - The loudspeaker system shall be
designed for use with an associated controller, Renkus-Heinz
(X12) (X24) or approved equal.  The controller shall provide
a 1200 Hz electronic crossover, parametric equalizers for
loudspeaker response smoothing and complete protection from
overload damage.) 

