LSPCAD中的dx,dy,dz中的dz如何设置正负？

goldau

LSPCAD中有关设置单元相对垂直距离的dX, dY, dZ。
我有一点看不明白，请指正
The relative position of the driver unit from an acoustic point of view relative an
imaginary reference point. dX denote the left-right direction and dY denote the
down-up direction, a positive dZ is farther away from the listener than a negative dZ.
For practical reasons one can set the position for e.g. the treble unit to
dX=0,dY=0,dZ=0 and use that as a reference point for the other units. The settings
of these parameters affect how the different driver units sum up and therefore the
total frequency/phase response.

liyusheng

看看justmls的pdf，里面好像有说明

goldau

版主请发一份给我吧：
ease40@126.com

liyusheng

已发